• 71.0 Hp (64.0 PTO HP)
• 8F/8R with Hi/Lo
• Open Station ROPS
• Constant RPM Control
• 540, 540E PTO Standard
Features:
Kubota E-CDIS Engine
Kubota's M60s have been redesigned and re-equipped with advanced features including Common Rail System (CRS) with Exhaust Gas Recirculation system (EGR) and Diesel Particulate Filter (DPF) Muffler for powerful yet clean and economical performance.
Kubota E-CDIS Engine
F8/R8 Transmission
The synchronized four speeds of the main shift and a high/low range supply tractors with 8 Forward and 8 Reverse speeds. Cab consule shown here.
F8/R8 Transmission
Hydraulic Shuttle
Shifting between forward and reverse is seamless and smooth with our new and improved M-Series Hydraulic Shuttle. A column-mounted lever with left-hand operation makes shifting easy. And when attaching implements, our improved inching feature is easy to perform, giving you the same feel as a halfclutch operation.
Easy to Shift 4WD Engagement
Stay productive by switching the 4-wheel drive on and off without stopping, even when moving out of a field onto a road. One simple switch does it all.
Easy to Shift 4WD Engagement
Bevel-Gear Front Axle
The bevel-gear front axle provides the M-Series with better all-around maneuverability, especially for jobs in tight spaces. The greater front-axle oscillating angle also offers increased lateral operation on uneven terrain.
Bevel-Gear Front Axle
Independent PTO
The Hydraulic Independent PTO helps you increase productivity. The M-Series comes with a standard 540 rpm Hydraulic Independent PTO. As a new fuel savings option the 540E is available on all M60 Series.
Constant RPM Management
All engines provide electronic control of engine RPM. Activating the system keeps engine revolution nearly constant with a push of the switch, preventing a reduction in PTO speed and enabling stable operation. It makes working with PTO-driven implements much more efficient.
Constant RPM Management
540E Economy PTO
For economy PTO operation, change the lever to 540E position. Engine is run at lower RPM to save fuel and reduce operating noise while still turning PTO shaft at 540RPM. Under the economy PTO operation, 540 PTO RPM is available at 1828 engine RPM on the M6060/M7060
Telescopic Lower Link Ends
The telescopic lower link ends, standard on all models, further facilitate implement attachment. facilitate implement attachment.
Telescopic Lower Link Ends
3-Point Hitch
The Category I & II 3-point hitches provide fast and simple attachment of rear-mounted implements. Two external hydraulic cylinders provide equal lifting force and smooth transfer of hydraulic power for easy operation.
3-Point Hitch
Hydraulics
The M-Series’ hydraulic pumps are now located on the transmission case instead of on the engine. This shortens the oil flow path increasing efficiency
• 8F/8R with Hi/Lo
• Open Station ROPS
• Constant RPM Control
• 540, 540E PTO Standard
Features:
Kubota E-CDIS Engine
Kubota's M60s have been redesigned and re-equipped with advanced features including Common Rail System (CRS) with Exhaust Gas Recirculation system (EGR) and Diesel Particulate Filter (DPF) Muffler for powerful yet clean and economical performance.
Kubota E-CDIS Engine
F8/R8 Transmission
The synchronized four speeds of the main shift and a high/low range supply tractors with 8 Forward and 8 Reverse speeds. Cab consule shown here.
F8/R8 Transmission
Hydraulic Shuttle
Shifting between forward and reverse is seamless and smooth with our new and improved M-Series Hydraulic Shuttle. A column-mounted lever with left-hand operation makes shifting easy. And when attaching implements, our improved inching feature is easy to perform, giving you the same feel as a halfclutch operation.
Easy to Shift 4WD Engagement
Stay productive by switching the 4-wheel drive on and off without stopping, even when moving out of a field onto a road. One simple switch does it all.
Easy to Shift 4WD Engagement
Bevel-Gear Front Axle
The bevel-gear front axle provides the M-Series with better all-around maneuverability, especially for jobs in tight spaces. The greater front-axle oscillating angle also offers increased lateral operation on uneven terrain.
Bevel-Gear Front Axle
Independent PTO
The Hydraulic Independent PTO helps you increase productivity. The M-Series comes with a standard 540 rpm Hydraulic Independent PTO. As a new fuel savings option the 540E is available on all M60 Series.
Constant RPM Management
All engines provide electronic control of engine RPM. Activating the system keeps engine revolution nearly constant with a push of the switch, preventing a reduction in PTO speed and enabling stable operation. It makes working with PTO-driven implements much more efficient.
Constant RPM Management
540E Economy PTO
For economy PTO operation, change the lever to 540E position. Engine is run at lower RPM to save fuel and reduce operating noise while still turning PTO shaft at 540RPM. Under the economy PTO operation, 540 PTO RPM is available at 1828 engine RPM on the M6060/M7060
Telescopic Lower Link Ends
The telescopic lower link ends, standard on all models, further facilitate implement attachment. facilitate implement attachment.
Telescopic Lower Link Ends
3-Point Hitch
The Category I & II 3-point hitches provide fast and simple attachment of rear-mounted implements. Two external hydraulic cylinders provide equal lifting force and smooth transfer of hydraulic power for easy operation.
3-Point Hitch
Hydraulics
The M-Series’ hydraulic pumps are now located on the transmission case instead of on the engine. This shortens the oil flow path increasing efficiency
- Duncan, British Columbia
- New
- Kubota
- M7060HD
- V3307-CR-TE4
- 74.3
- Diesel
- Available